MOEN 104421 Cartridge Puller, for 1200, 1222 and 1225 Single Handle Cartridges |  | Brand: Moen
Category: Home Improvement
List Price: $105.45
Buy New: $28.53
as of 11/21/2009 04:03 CST details
You Save: $76.92 (73%)
New (7) from $28.53
Seller: ANTOnline
Rating:  5 reviews
Sales Rank: 14049
Media: Tools & Hardware
Shipping Weight (lbs): 0.5
Dimensions (in): 7.5 x 1.5 x 1.4
MPN: 104421
Model: 104421
UPC: 019934043359
EAN: 0026508074589
ASIN: B00083EC6C
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Moen #104421 Cart Puller | | • | MOEN INC/FAUCETS |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
Cartridge Puller, Used To Remove Moen Model #1200, 1225, & 1222 OEM Faucet & Shower Cartridges, Replaces Moen Model #13705.
|
| Customer Reviews:
 incredibly useful August 5, 2009
Samantha (Groton, MA)
1 out of 1 found this review helpful
A bit pricey for something I doubt we'll ever need again -- or at least not for another 5-10 years by which time it will be buried so deep in the shop I'll never find it. It cost as much as the replacement cartridge.
Without it, we were unsuccessful at pulling the cartridge after 20 minutes. With it, the cartridge popped out nearly instantly. Huge difference!
Moen Cartridge Puller August 1, 2009
Lyle E Pfeffinger
A litte expensive but it does the job much better than the plastic puller that comes with the Moen Cartridge, especially if the cartridge is hard to get broke loose.
indispensable June 18, 2009
lazy lester (Sebastopol, CA)
I would have been in big trouble without this tool... with the faucet disassembled and unable to get the cartridge out, using this tool was the ONLY way, period. If your single handle shower is old, there's a good chance the cartridge is stuck. If you run into this, then close everything back up, and turn on the water again, order this tool and reschedule the project.
The videos on the Moen website are helpful too, but they don't mention this tool!
MOEN 104421 Cartridge Puller, for 1225 Single Handle Cartridge October 29, 2008
Kurtis Simmons
1 out of 1 found this review helpful
I tried the plastic part that came with the cartridge. Of course, it broke. So, I purchased this metal cartridge puller. It made short work of extracting the old cartridge and worked as advertised. Just make sure and follow directions to the letter and don't tighten too much because it will bend or break the cartridge piece the puller fits into.
Worth every penny October 2, 2008
Brian J. Buehler (Michigan, USA)
1 out of 1 found this review helpful
My in-laws had a few older Moen faucets which reached time to be lubricated or replaced since they were difficult to operate and one leaked. Using regular tools, I was unable to get the bathroom sink faucet cartridge to move at all due to the age of the faucet and very hard water (deposits). That faucet got replaced before I got the tool.
The leaky shower faucet cartridge was extracted using this tool according to the instructions. However, after "loosening" the cartridge, it was still impossible to pull it by hand. Continuing to turn the extractor nut pulled the cartridge out and revealed that the rubber seals on the cartridge body had stuck to the inside of the casting and had been shredded by pulling the cartridge out past them. Without this tool, the wall would have to been broke open to solder on a new valve body - luckily, this tool saved me from having to give that news to my father-in-law!!
|
|
|
News 
